Equivalence:Lewatit S100LF/S80,Dowex HCR-S,Purolite C100E,Amberlite IR100, Tulsion T40
001x7 is a GEL Type Strong Acid Cation Exchange Resin having 7% cross linked polystyrene matrix with sulphonic acid as a functional group. The resin has good operational capacity under various raw water quality. It also provides better physical stability. The resin is supplied with standard beads size distribution to give optimum operating capacity with minimum leakages of ions and also minimum pressure drop across the resin bed. The resin is available in both Na+ and H+ form.
001x7 is also available with varied particle size to match specific requirement, under different grades, the details are available with our technical service department.
Cross linked polystyrene
Hard moist beads
Particle size (mm)
Moisture content %
47-53 Na+ form
Total Exchange Capacity (Min) eq/ltr
1.9 Na+ form
Bulk density or shipping weight gms/ltr
Na+ form 770-870
Operating pH range
Solubility in common solvents
Operating Temperature℃ (max)
Volume change% (max):Na+ to H+
|SUGGESTED OPERATING CONDITIONS|
Regenerant Flow Rate
Regenerant Contact Time
Regeneration Level 100%
Kgs/m3 of resins
Rinse Flow Rate
Running Flow Rate
APPLICATIONS: 001x7 (Na+) is generally used for softening application. The resin has excellent physical strength and is highly resistant to osmotic shocks. 001x7 (H+) is generally used for demineralization application, and it gives very low level of Sodium leakages. For demineralization application 001x7 is recommended to get high purity water depending on the raw water quality. In polishing units the MB grade of 001x7 along with MB grade of 201x7 is recommended for mixed bed units to obtain high purity of water required for high pressure boiler and steam generator.
CAUTION: Strong oxidizing agents like nitric acid can cause explosive type reaction, when mixed with Ion Exchange resins. Knowledgeable sources should be consulted in the handling of this material.
NOTE: Ion Exchange Resins are sold on a volume basis, but are packed and shipped by weight. The shipping weight for each resin is fixed & does not take into consideration the variations in density and moisture content allowed within the product specifications. Therefore although the weight of the material is constant, there may be slight variations in volume, reflecting batch to batch variation of density and moisture content.
STORAGE CONDITIONS: The resin supplied in drums or bags should be stored in cool shed (warehouse) away from direct sunlight & should be periodically damped down with clean water.