Industry Grade Ready-to-Use Polishing Mixed Bed Resin Installed After RO System huizhu™
Industry Grade Ready-to-Use Polishing Mixed Bed Resin Installed After RO System
huizhu™ MB6150 is a fully regenerated mixed bed of cation and anion exchange resins intended for use in high purity water systems after reverse osmosis. This mixed bed product is particularly suitable for use in the polishing of high purity water for specialty electronics applications such as the manufacturing of disk drives, display devices, CD-ROMs, discrete semiconductor devices, lower density IC chips, or in the back-end chip dicing and mounting operations.
It is a ready-to-use mixed bed resins, suitable for the refillable cartridges or big pressure vessel, and after exhaustion it can be regenerated if necessary with relative regeneration equipment. Danhao™ MB6150 could deliver 18 Megohm﹒cm quality water with TOC levels below 20 ppb.
PROPERTIES | |
Ratio of Cation/Anion | 34%:66% |
Ionic Form | H﹢/ OH- |
Moisture content % | 50-60% |
Total Exchange Capacity (Min) eq/ltr | 2.0/1.2 |
Bulk density or shipping weight gms/ltr | form 680-720 |
Operating pH range | 1-14 |
Solubility in common solvents | Insoluble |
Operating Temperature℃ (max) | 60 |
SUGGESTED OPERATING CONDITIONS | ||
Bed Depth | Meter | Above 0.8 |
Running Flow Rate | Meter/Hour | 10-60 |
LIMITS OF USE: MB6150 Ready-to-Use mixed bed resin is industrial uses. For all other specific applications such as pharmaceutical, food processing or potable water applications, it is recommended that all potential users seek advice from Danhao Trading corporation or your local resin suppliers or distributors in order to determine the best resin choice and optimum operating conditions.
PACKING: 5Liter/bag with alu foil vacuum packing, every 5bags/carton
CAUTION: Strong oxidizing agents like nitric acid can cause explosive type reaction, when mixed with Ion Exchange resins. Knowledgeable sources should be consulted in the handling of this material.
NOTE: Ion Exchange Resins are sold on a volume basis, but are packed and shipped by weight. The shipping weight for each resin is fixed & does not take into consideration the variations in density and moisture content allowed within the product specifications. Therefore although the weight of the material is constant, there may be slight variations in volume, reflecting batch to batch variation of density and moisture content.
STORAGE CONDITIONS: The resin supplied in drums or bags should be stored in cool shed (warehouse) away from direct sunlight & should be periodically damped down with clean water.